Custom processing: No Brand: Shanghai from Yu Model: TY-1/2/3 Weight: 8 (Kg) Scope: transport all kinds of corrosive liquid, with particles of liquid maximum output pressure: 8 (N / S) Dynamic Forms : pneumatic airless sprayer Air consumption: 0.3m3 / min load displacement: 5L / min spray width: 40cm nozzle diameter: 0.025in pressure ratio: 1: 1 Category: Best air sprayer spray distance: 50cm Specifications : TY-1, TY-2, TY-3 many of our enterprises in the production and processing of products in the spray which has encountered a lot of small pieces, small, and the need to frequently change the color of the product requires spraying, then we can choose the most energy efficient, convenient diaphragm pump to spray, and we configured the device end of the pressure feed HVLP spray gun air environment, to ensure that our uniform coating, the coating light. Some smaller amounts or coating effect requires no spraying high user selectable pressure vessel transporting barrels regulator spraying operations, while the end of the device matching our HVLP spray gun air environment. Common sense diaphragm pump: the diaphragm most use gas source to drive, with a fire and explosion characteristics, can transport all kinds of corrosive liquid, with particles of high viscosity, volatile, flammable liquid. Diaphragm no seal, no leakage, runner spacious, so delivery containing particles, high viscosity [viscosity up to 10000 cps], volatile and corrosive media, will not cause environmental pollution and danger to personal safety. No rotating parts, through good performance, allowing the maximum particle diameter of 10 mm. Liquid without shear flow, the pump component wear their own small. Diaphragm pump features: 1, since the air as the driving force, so the flow with back pressure (outlet resistance) automatically adjust to changes, suitable for high viscosity fluids. The centrifugal pump operating point is water as a benchmark to set a good, if slightly higher viscosity fluid is used, you will need to complete reducer or inverter, the cost will be greatly improved, and for the gear pump is the same. 2, with an explosive atmosphere in a reliable and low cost pneumatic pump because: first, it is impossible to produce a spark when grounded; and second, the work of non-heat generating, the machine does not overheat; and third, the fluid does not overheating because the diaphragm for fluid agitation to a minimum. 3, at the site bad places, such as wastewater construction sites, mining, because the sewage impurities and complex components, easy to plug the pipeline, so that the pump is formed on the load is too high, the motor heat vulnerability. Pneumatic diaphragm pump can flow through the particles and adjustable, automatic stop to clear the pipe blockage. 4, can be used to transport relatively unstable chemical nature of the fluid, such as: light-sensitive materials, such as flocculation liquid. This is because the low-shear diaphragm little physical impact on the material. 5, there are dangers, material handling corrosive, the diaphragm material can be completely separated from the outside world. 6, or some tests to ensure that no impurity contamination of raw materials. 7, diaphragm small easy to move, without foundation, of the ground is very small, easy to install and economical. Can be used as a mobile material handling pump. Diaphragm